Skip to main content

Troubleshoot recording and microphone problems

Fix microphone permission, disconnected recorders, and saving problems during a live meeting recording.

Written by Max Sherman

Who can do this: Administrators and Meeting Managers.

Find the message you see, then follow the steps. For the basics, see Record a live meeting with your microphone. For room setup, see Set up meeting recording.

"Start the live meeting before recording"

Recording is only available during a live meeting. Start the live meeting, then select Record in the Recording section of the meeting sidebar.

"Cancelled meetings cannot be recorded"

The meeting is marked as cancelled, and cancelled meetings can't be started or recorded. Check that you opened the right meeting.

The browser blocked the microphone

If you denied microphone access, or see "Microphone permission is required for live transcription.":

  1. Open your browser's site settings for ClerkDirect.

  2. Allow the microphone.

  3. Reload the page and select Record again.

"The microphone could not start…"

Check that the microphone is plugged in, switched on, and not in use by another app. Then select Record again. During a recording you can choose another device from the Microphone list.

"Not capturing audio · Reconnecting"

Sound has stopped reaching the recording. ClerkDirect keeps trying to restart it by itself, so you don't need to select Resume. When sound returns, the status goes back to Recording. Anything said before then isn't recorded. On other ClerkDirect pages, the recording indicator shows Not capturing audio.

A short message shows the cause:

  • "The microphone disconnected…": reconnect it, or choose another microphone from the Microphone list.

  • "The microphone stopped supplying audio…": check that it isn't muted or in use by another app.

  • "The browser stopped its audio…" or "No audio is reaching the recording…": keep the computer awake and the browser open. See Set up meeting recording.

If the message adds "If this continues, stop the recording and start it again.", select Stop and save, then select Record.

"Your recording was interrupted due to a technical issue…"

The recording has stopped, and nothing more is recorded until you select Record again. Keep the page open so the audio captured so far can save.

"Recording paused because the microphone disconnected…"

The microphone disconnected during a pause. Reconnect the microphone and select Resume, or choose another microphone from the Microphone list.

"This browser cannot record audio…"

Open ClerkDirect in a current version of a supported browser on the recording computer.

"This meeting is already being recorded on another device…"

Only one computer can record a meeting at a time. Go to the computer that is recording and stop or continue the recording there. Other Administrators and Meeting Managers can also pause, resume, or stop that recording from the Recording section on their own computer.

"Your recording is saved on this computer…"

The internet connection dropped. Keep the page open. Recording continues, and the saved audio uploads automatically when the connection returns.

"Recorder disconnected" or "Recording computer is not responding…"

The recording computer stopped checking in, for example because it lost its connection, went to sleep, or its browser closed.

  1. Check the recording computer. Its microphone may still be recording.

  2. If you can, reconnect it or reopen ClerkDirect in the same browser on that computer.

  3. If you can't reach it, you can still end the meeting from another computer. The End meeting? dialog explains that the remaining audio uploads when ClerkDirect reopens on the recording computer. See End a live meeting and get your minutes.

"Recording stopped · Saving failed"

Keep the recording computer online with ClerkDirect open so the audio can finish uploading. If the message stays, contact ClerkDirect support with the meeting name and time. See Get help from ClerkDirect support.

Ending the meeting is blocked by the recording

  • "Stop or recover the recording on the recording computer before ending the meeting": go to the recording computer, select Stop and save, then end the meeting.

  • "Recording stopped, but saving is not confirmed…": wait for the audio to finish saving on the recording computer, then end the meeting again.

The live transcript isn't updating

The live transcript only runs while the room computer is recording. Check that the recording status shows Recording, not Recording paused or Not capturing audio · Reconnecting. If the transcript says it is reconnecting, it retries on its own. See Follow the live transcript.

Related articles

Did this answer your question?