Skip to main content

Set up meeting recording: room microphones, Owl cameras, and Teams or Zoom calls

Choose the recording computer and microphone, place an Owl or similar device, keep the computer awake, and record hybrid Teams or Zoom meetings.

Written by Max Sherman

Who can do this: Administrators and Meeting Managers.

ClerkDirect records meetings with the recorder in the live meeting. It runs in your web browser, so there's nothing to install, and it works the same whether or not you're also on a Teams or Zoom call. This article covers setting up the room. For the Record, Pause, and Stop and save controls, see Record a live meeting with your microphone.

What the recorder does

  • It records sound only. It doesn't use a camera or record video.

  • It records one microphone. It records what the microphone you select can hear, and nothing else. It doesn't record the computer's own sound, and it doesn't connect to a Teams or Zoom call.

  • It runs on one computer. The computer where you select Record does the recording. Each meeting can have one recording device at a time.

Choose the recording computer

  • Use a computer that stays in the room for the whole meeting, with the microphone connected to it.

  • Use a current version of Google Chrome or Microsoft Edge. We haven't confirmed Safari, Firefox, phones, or tablets for meeting recording, so don't rely on them for a real meeting.

  • Sign in to ClerkDirect on that computer, and allow microphone access when the browser asks.

Colleagues can help from their own computers. See Co-manage or take over a live meeting.

Choose a microphone

Any microphone the computer can use will work, including a USB microphone or a conference device. A laptop's built-in microphone hears the nearest people best, so in a boardroom use a microphone meant for the whole room.

ClerkDirect records one microphone at a time and can't combine two. If your room has microphones on a sound system, ask your audio provider how to connect that system to the computer as one microphone input.

Set up an Owl or similar conference device

These steps also apply to other all-in-one conference cameras and speakerphones.

  1. Connect the device by USB directly to the recording computer. Only that computer can use it. If it's plugged into the boardroom computer, record on the boardroom computer, not on a laptop at the same table.

  2. Put it on the table where people speak, as close to the middle of the group as you can. Don't leave it on a side table.

  3. Check that everyone who speaks is within its range. Owl Labs lists an 18 ft (5.5 m) audio pickup radius for the Meeting Owl 3. Check the range for your model.

ClerkDirect uses only the device's microphone. Its camera is for your Teams or Zoom call.

Select the microphone and check the sound

Do this at the start of every meeting. ClerkDirect starts with the browser's default microphone, and the Microphone list only appears once recording has started.

  1. Start the live meeting.

  2. In the meeting sidebar, in the Recording section, select Record.

  3. In the Microphone list, choose your device. An Owl usually has Owl in its name. If your device isn't listed, check that it's connected to this computer. The list updates when a device is plugged in.

  4. Ask someone at the far end of the table to speak, and check that the Input level meter moves.

  5. Open the Live Transcript tab and check that their words appear.

How to tell it's recording

  • The Recording section shows Recording and the elapsed time.

  • The Input level meter moves when people speak.

  • New words keep appearing in the Live Transcript tab.

  • On other ClerkDirect pages, the recording indicator shows Recording or Paused with the time.

If the section shows Recording paused, someone selected Pause and nothing is being recorded. Select Resume to continue.

If it shows Not capturing audio · Reconnecting, sound isn't reaching the recording. See Keep the computer awake below.

Keep the computer awake

While recording, ClerkDirect asks the browser to keep the screen on. That only works while a ClerkDirect tab is showing in that browser, and a browser can refuse, so don't rely on it. Presenter mode also asks for this while its tab is showing, recording or not. Before the meeting:

  • Turn off the screensaver.

  • Set the computer's screen and sleep settings to Never, or to longer than your longest meeting. If your IT team manages these settings, ask them to change them for this computer.

  • Plug the computer into power, and keep a laptop's lid open.

  • Keep the meeting page open until the audio is saved.

ClerkDirect can't record while the computer is asleep. If the microphone stops sending sound, ClerkDirect doesn't pause. The Recording section shows Not capturing audio · Reconnecting with a short message about the cause, and ClerkDirect keeps trying to restart the sound by itself. When sound returns, the status goes back to Recording. Anything said before then isn't recorded, and ClerkDirect doesn't show how much was missed.

While this is happening, there's no sound or pop-up alert, so check the Recording section during the meeting. On other ClerkDirect pages, the recording indicator shows Not capturing audio. Other Administrators and Meeting Managers in the live meeting see the same status on their computers.

If the status doesn't clear, check the microphone. If that doesn't help, select Stop and save, then select Record to start again.

If you see "Your recording was interrupted due to a technical issue. Please try recording again.", the recording has stopped, and nothing more is recorded until you select Record again. Keep the page open so the audio captured so far can save.

If the microphone is unplugged during a recording, ClerkDirect switches to another working microphone if it can, and shows it in the Microphone list. That microphone may not hear the whole room. ClerkDirect goes back to your choice when it's plugged in again.

If your internet is unreliable

A dropped connection doesn't stop the recording. ClerkDirect keeps saving audio on the recording computer and shows "Your recording is saved on this computer…". Keep the page open, and the audio uploads when the connection returns.

The live transcript can't update while you're offline, and words spoken during that time don't appear in it later. They're still in the recording.

Record a hybrid meeting on Teams or Zoom

You can run a Teams or Zoom call while ClerkDirect records. The recorder works the same with either one, so you don't need to change call apps to use it. People in the room are recorded through your room microphone as usual.

People joining remotely

Remote participants are recorded only if their voices play out loud in the room and your microphone picks them up.

  • If the call plays through headphones, or the speakers are muted, remote voices aren't recorded.

  • Play the call through a speaker in the room.

  • Even then, remote voices can be faint or missing. Conference devices and browsers filter out sound from the speakers to prevent echo, and ClerkDirect leaves that filtering on.

Test this before your first hybrid meeting. Have someone join the call remotely and talk while you watch the Input level meter and the Live Transcript tab. Use a practice meeting, so the test recording doesn't stay with a real one.

Keep the call's recording as a backup

If your organization allows it, also record the call in Teams or Zoom. If remote voices are missing from the ClerkDirect recording, you can use that file instead:

  1. Download the recording from Teams or Zoom.

  2. Open the meeting in ClerkDirect. In the meeting sidebar, select Start meeting > Upload recording.

  3. Upload the file. If the meeting already has a transcript, ClerkDirect asks you to confirm, because the upload replaces the current meeting source. Select Upload and replace.

Existing minutes files stay as they are. To draft new minutes, see Draft minutes after a meeting.

Share the microphone with the call

  • A call and ClerkDirect can usually use the same microphone at the same time. If you see "The microphone could not start…", check that no other app is holding it, then select Record again.

  • If you mute the room on the call, check that the Input level meter still moves. Some conference devices mute their microphone for every app.

The ClerkDirect app for Teams

The ClerkDirect app for Microsoft Teams is separate from the recorder. It streams a Teams meeting's audio and video into a ClerkDirect live meeting. See Microsoft Teams live streaming.

Related articles

Did this answer your question?